You have no items in your shopping cart.
Subtotal
$ 0.00
Brushless 12" High Power Thermatic® Electric Fan (12 VOLT) (PART #0127)
Davies CraigBrushless Thermatic® Electric Fansoffer outstanding performance for their size delivering up to a staggering 53% increase of air flow and 5 times the service life over the standard brushed models!
It is also 25% thinner than its brushed High Power motor equivalent!
Brushless Thermatic® Fans are suitable for use as:
Radiator cooling fans
Air conditioner condenser Fans
Transmission and engine Oil cooler fans
It provides, constant or variable air flow, increased fuel economy, improved air conditioning performance, cooler engine temperatures, low profile, high performance, increased engine power.
The IP68 rated motor with built in reversible motor rotation technology allows for either upstream (pusher) or downstream (puller) applications.
The flexibility of nine (9) different smart motor control modes; Full speed running, analogue speed control or pulse width modulation (PWM) speed control allowing for optimal control in any application.
These fan assemblies are set up for upstream/ pusher applications from the factory.
For downstream applications, the fan blade must be removed and turned over and the wiring adjusted as per the instructions. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.
| COMPONENTS | |
| PART DESCRIPTION | Units |
| Brushless 12" High Power Thermatic® Electric Fan (12 VOLT) | 1 |
| Mounting Feet | 4 |
| Product Specifications | ||
| Fan Model | 12” High Power Brushless | |
| Part Number | #0127 | |
| Maximum Airflow | 1295 CFM (ft3/min) | |
| 2200 m3/min | ||
| Dimensions | Height | 293 mm (11.5 in) |
| Width | 293 mm (11.5 in) | |
| Depth | 68.9 mm (2.71 in) | |
| Operating Voltage | 13.5 V | |
| Startup Voltage | 7.5 V | |
| Maximum Voltage | 18 V | |
| Current Draw | 18 A | |
| Weight | 1500 grams | |
| 3.3 lbs | ||
| Ambient Temperature | -40°C– 80°C | |
| -40°F– 176°F | ||
| IP rating | IP68 | |
| Speed Control | ||
| Parameter | Minimum | Maximum |
| Speed Range | 420 RPM | 4000 RPM |
| PWM Frequency | 100 Hz | 1000 Hz |
| PWM Duty Cycle% | 0% | 100% |
| PWM Signal Voltage | 7.5 V | 18 V |
| Analogue Voltage | 0 V | Supply voltage |
UNIVERSAL FAN FITTING KIT
(sold separately)
The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic® Fans and other electric fan models.
- Parts #1000, #1001, #1002 or #1003
If you just require the mounting hardware (no wiring):
- Quick Fit Kit Part #0579 or Mounting Hardware Part #0578
What size Thermatic® Fan do I need˝
If your car make is not listed in our Fan Selection Guide or the Model Selection Guide we suggest the following:
- Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to“Fan Models” to check which fan/s will fit your core.
- Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
- In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other. - If you require advice, please contact us for assistance.
Fan Mounting Direction
| Categories | Other |
|---|---|
| Manufacturer Part Number | 0127 |
| Brand | Davies Craig |
| Part Type | Other |