ED2105 - EDELBROCK PERFORMER INTAKE MANIFOLD FITS FORD BIG BLOCK FE 332/390/428

Performer 390 Intake Manifold for Ford FE, Satin Finish

Edelbrock part #2105 Performer 390 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021055
Series	Performer
Material	Aluminum
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, .
Installation Notes	Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247; Manifold height: A-4.35", B-5.50" (same as stock); Carb pad height: 4.92"; Carb recommendations: Edelbrock Thunder Series AVS or Performer Series Carb, 600-800cfm. For automatic transmissions use #1483 or #1844.; Port exit dimensions: 1.06" x 1.75"; Will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361& 391 c.i.d. Ford truck V8s.; Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require modification to fit.; Due to the possible lack of hood clearance, you may not be able to use the OEM water heater space block between the intake manifold and carburetor.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual