ED22710 - EDELBROCK SPARK PLUG WIRE SET CUT TO FIT 180° BOOTS 50OHM - RED

Max-Fire (Ultra-Spark 50) Universal Flex Boots Spark Plug Wire Set

The Edelbrock #22710 Max-Fire Universal Ultra-Spark 50 spark plug wire sets feature the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8 application perfectly. Includes the straight spark plug boot pre-installed from the factory and the 90 Deg boots. The straight boot is a "Vari-Angle" boot that allows the boot to be bent and hold its position in tight areas to clear headers. The Edelbrock #22710 include early OEM socket style and late style HEI plug distributor terminals to make sure your covered. Comes with the following wire lengths; one 53", one 49", two 45", one 41", one 37" and two 33", as well as 11 points style terminals, 11 HEI plug style terminals, 9 straight distributor boots, 9 90 Deg distributor boots, 1 distributor to coil wire, dielectric grease and installation instructions. Will require the use of a wire crimping tool to complete the installation.

Manufacturer	Edelbrock
Application	Universal
UPC	00085347227105
Spark Plug Boot Material	Compact Silicone
Noise Suppression Type	No
Spark Plug Wire Resistance	500
Core Material	Magnetic Kevlar Core
Wire Separators Included	No
Coil End Boot Color	Black
Insulation Outside Diameter	0.23 in
Insulation Color	White
Insulation Material	Inner Insulation
Spark Plug End Boot Color	Black
Availability Note	Available to Order
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, .
Installation Notes	Check your spark plug wires regularly! Like everything else on your car, spark plug wires need to be checked and require periodic changing. If you want to keep the performance of your engine at the optimal level, we recommend you replace your spark plug wires at the same time you replace your spark plugs. Fouled, damaged, or worn out spark plugs can lead to a variety of engine problems, such as misfires, hard starts, increased emissions, poor fuel economy and reduce acceleration. For most vehicles, you should replace your spark plugs every 30,000 miles.
Outside Diameter	8.5 mm
Resistance	500 Ohms
Spark Plug End Boot Quantity Angled	6
Spark Plug End Boot Quantity Straight	2
Spark Plug End Terminal Type	Standard
Universal Or Specific Fit	Specific
Wire 1 Length	22.0 in
Wire 2 Length	28.0 in
Wire 3 Length	32.0 in
Wire 4 Length	32.0 in
Wire 5 Length	40.0 in
Wire 6 Length	41.0 in
Wire 7 Length	41.0 in
Wire 8 Length	44.0 in