ED7594 - EDELBROCK CARBY RPM AIR GAP INTAKE MANIFOLD FITS HOLDEN V8 W/VN HEADS

RPM Air-Gap Holden 253-304-308 1988-98 Intake Manifold

Edelbrock part #7594 RPM Air-Gap intake manifold is designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988-98 Holden VN cylinder heads. This RPM Air-Gap manifold is a dual-plane design that is tuned for both excellent throttle response and greater horsepower from 1500 to 6500 rpm. This manifold has been designed to fit both stock 1988-1998 EFI style heads and the Edelbrock Holden VN RPM cylinder heads.

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347075942
Series	RPM Air-Gap
Material	Aluminum
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Holden
Availability Note	Available to Order
Warranty	12 Months
RPM Range	1500-6500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, .
Installation Notes	Recommended intake gasket HA424; Do not use high performance or competition type intake gaskets for street application. Due to material deterioration under street driving conditions, internal leakage of both vacuum and oil may occur.; Manifold height: A-4.80", B-5.82"; Carb pad height: 5.31"; Carb recommendations: Edelbrock AVS2 or Performer Series 600-750 cfm.; Port exit dimensions: 1.16" x 2.00"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Rear Maximum Height	5.820 in
Single Or Dual Plane Type	Dual