ED8898 - EDELBROCK ALLOY WATER PUMP PULLEY FITS CHEV LS EDELBROCK PUMP

Billet pulley for LS water pump #8896

The 8898 is a hard anodized billet aluminum water pump pulley. This pulley is designed to work with our 8896 LS water pump. This pulley is a universal type design that will work with belt offsets of most GM Gen III and Gen IV small block V8 engines (LS LM LQ and LR). The pulley diameter is identical to stock and it requires a 3/4" pilot.

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347088980
Mounting Hole Quantity	4
Attachment Type	Bolts
Belt Type	Serpentine
Pulley Type	Serpentine
Availability Note	Available to Order
Warranty	12 Months
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, .
Installation Notes	Incorrect alignment or an unbalanced condition puts excessive strain on the pump's shaft and/or bearing and will result in early failure of the shaft and/or bearing; The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft; Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4" pilot hole, so an adapter must be used when installing a water pump with a 5/8" shaft, the adapter bushing is supplied with the unit; So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty; The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump
Color	Black
Inside Diameter	5.475 in
Material	Aluminum
Outside Diameter	5.850 in
Width	3.26 in